The health ministry about adjusting domestic

water purifiers and reverse osmosis

Domestic nanofiltration water purifiers health administrative permission notice

Health ministry of China

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Health supervision and hair [2011] no. 58

The provinces, autonomous regions, municipalities directly under the central government health TingJu, xinjiang production and construction corps, China health centers for disease control and prevention, the ministry of health supervision center:

For deepening the drinking water safety products involving health (hereinafter referred to as the administrative licensing wading products) health reform, the decision by the provincial health administrative departments shall be responsible for the domestic water purifiers and reverse osmosis domestic nanofiltration water purifiers health administrative licensing work. Now will notify the relevant matters are as follows:

A, August 1, 2011, the ministry shall no longer accept domestic reverse osmosis and domestic water purifiers nanofiltration water health administrative licensing applications, has been accepted, I before will continue to fulfill licensing procedures.

Second, the provincial public health administrative department shall, according to the provincial health safety products involve drinking water health administrative licensing procedures "(health supervision and hair [2009] no. 75), reverse osmosis on domestic water purifiers and domestic nanofiltration water purifiers, engage in examination and approval and shall comply with the following provisions:

(a) production capacity of audit.

The provincial health supervision bureau of domestic reverse osmosis water purifiers and domestic nanofiltration water purifiers production capacity on site audit opinion shall be attached with the following information:

1. Production on site audit table (including big, small and the series product confirmation table);

2. Product materials and formula (each material shall be marked with the name, specification, quantity or amount and brand);

3. The production process;

4. Production equipment and inspection equipment list;

5. Product nameplate and manual;

6. Contact with the potable water of the health and safety of main material certificate (can be health license copy of the original, also can be the public health administrative department at or above the provincial level for the recognition of the certificate of inspection, the actual production product makes the enterprise to test report the original);

7. Product color photos and other relevant data.

(2) test.

1. The approval of health administrative departments at the provincial level of product inspection agency responsible for product wade the health safety inspection and large product performances of the inspection and the department of health for the recognition of the product inspection agencies responsible for small wade the functional sex of the products inspection.

2. Inspection institutions of samples for inspection shall be provincial health watchdog sealed samples products; Inspection report issued by the inspection shall be attached with the application form, the notification of acceptance inspection, product manuals, sampling single, all materials are by the inspection organizations shall be page official seal.

(3) to declare.

The first application for domestic water purifiers and reverse osmosis domestic nanofiltration water purifiers permitted, the applicant shall submit the following material:

1. The license application form;

2. Production capacity on site audit opinion;

3. Product inspection report;

4. The enterprise standard (should have to meet the requirements of health index);

5. Industry and commerce business license copy and production place building droit certificate (or lease proof);

6. Production by, it shall provide production by contract;

7. The provincial public health administrative department is required to provide other relevant data.

Attach a sealed samples, large sample 1 except products.

(4) review.

1. The provincial public health administrative department accepts the domestic water purifiers and reverse osmosis domestic nanofiltration water purifiers licensing applications shall be based on the water quality, the processor technology review guide "(appendix 1), declare to product data review, and according to the technology in accordance with the decision of approval or examination opinions with the health administrative licensing decision.

2. Domestic water purifiers and reverse osmosis domestic nanofiltration water health licensing of product technical information "original" column write demanded to see attachment 2.

(5) continue, change and replacement.

1. Get permission of domestic health entity reverse osmosis water purifiers and domestic nanofiltration water purifiers due in the validity of license application continues, shall, in accordance with the provincial health safety products involve drinking water health administrative licensing procedures "regulation, to actual production enterprise product the local provincial health administrative departments apply, and submit relevant materials.

2. Domestic water purifiers and reverse osmosis domestic nanofiltration water purifiers in the ministry before expiration of the original license permission to apply for alteration or replacement of license matters entity, it shall report to the ministry of the original application evaluation institutions, according to the health ministry stipulated by material.

(6) products.

Domestic water purifiers and reverse osmosis domestic nf series products, the application for water purifiers shall, in accordance with the "water quality processor series product health administrative licensing supplementary provisions (health supervision and hair [2007] no. 268) execution.

Three, the provincial public health administrative department to strengthen the management of product licensing work, in strict accordance with the relevant laws and regulations, and regulate the release of the original product health license management. To fully understand the license of professional technical characteristics to play an active experts and technicians role, make product technical review. The provincial health supervision institutions to further improve the responsibility consciousness, strict production enterprise on site audit requirements, are not qualified, on site audit are not through.

All four, to strengthen the health of the original license for wading product everyday supervision, serious search and analysis the current existing in the work of supervision of the weak link, perfecting the long-term measures, earnestly implement the supervisory duties. Want to begin work, make the product sampling sampling inspection plan, publicize the result of sampling observation. To strengthen the supervision of the actual production process products, to do STH without authorization changes the product formula or components, production process and production conditions, in accordance with the requirements in the investigation.

Everywhere in the execution of the relevant problems found, please promptly inform the food safety and health supervision coordination.

Accessories: 1. Water quality technology review guidelines processor

2. Domestic water purifiers and reverse osmosis domestic nanofiltration water purifiers health licensing product technical information "original" column write requirements

Two ○ in one on July 6

Annex 1

Water quality technology review guidelines processor

In order to regulate and unified processor technology review, water quality work according to the living and drinking water hygiene supervision and management method ", "the living and drinking water hygiene standards" (GB5749), and "the living and drinking water health standards", "the health ministry drinking water safety products involving health inspection regulations and health ministry formulated this guide files, etc.

1. The product materials and formula

1.1 function.

1.1.1 shall state the function, raw water after water quality with the quality of the output processor after requirements.

1.1.2 effluent water shall, in accordance with the water treatment craft different and use different assessment standard.

1.1.2.1 adopting reverse osmosis technology, shall be in line with the life of the health and safety of drinking water processor and function evaluation standard-reverse osmosis treatment equipment the requirements of the ";

The 1.1.2.2 nanofiltration technology shall be in line with the drinking water purification, water quality standard of CJ94) requirement. (

1.1.2.3 the activated carbon or ultrafiltration technology, shall be in line with the life of the health and safety of drinking water processor and function evaluation standard-general water quality requirements of the processor.

1.2 water treatment technology.

Shall indicate the raw water through which processing unit (including sterilizer) and (water purification), and water flow chart said. If there is heating device, in a flowchart shall be indicated in the hot and cold water exports. Reverse osmosis water purifiers and nf should be marked in a flowchart water filter waste water exports.

1.3 each treatment unit and materials for the name, brand, specifications, dosage and its use fixed number of year.

1.3.1 each processing unit is to show all water treatment materials and the main components in contact with water. Contact with water main components include shell, goose neck bibcock, control valves, water containers and inner, if use disinfection measures, and shall also include sterilizer; Large water quality should also include the processor used pipe and pipe fittings.

1.3.2 shall state the water disposal material specification, such as the filter material size (the unit is "eye" or mm) or filter aperture (unit for "u m").

1.3.3 filter material shall state the dosage, if is filter also shall state the quantity; With ozone disinfection, it shall clearly write down gas production.

1.3.4 use fixed number of year shall state the water treatment materials and contact with water or the major parts of the service life of the sterilizer, the service life of uv lamp application "hour" said.

Applicable scope: water quality in 1.4 "municipal water" for the raw water.

1.5 technology parameters shall include the total net water, water purification the rated flow and working pressure or feed water pressure, should use the statutory measurement unit. Working pressure also shall state the scope of the pressure, reverse osmosis and nanofiltration water processor shall state the feed water pressure range. Water softeners should indicate the regeneration cycle.

2. The production process and diagram

Production process should be bag when Europe briefly and process technology, process simple plan should be consistent with this process diagram.

3. The enterprise standard or quality standards

3.1 normative references documents shall contain health related health standards.

3.2 classification and named should include the product model and name principles.

3.3 technical requirements should include the technical parameters and materials and components, in and out of the water quality health requirements, etc.

3.4 the water quality test method inspection shall, in accordance with the standard of living and drinking water of testing method (GB/T5750).

4. Inspection report

The report includes the reliability of the audit data, rationality, and units of measurement normative, and according to the health ministry drinking water safety products involving health inspection rules "and so on the related requirements, key audit integrity of the test items.

4.1 inspection report shall attach inspection application form.

4.2 inspection report and declare the product name shall be identical.

4.3 inspection report is valid for two years.

4.4 the requirements of different water quality processor

4.4.1 small water quality shall provide health safety processor inspection report and the health functional inspection report.

4.4.1.1 health safety inspection.

4.4.1.1.1 domestic water processor inspection report by provincial health administrative department as issued by the inspection organizations; Import water quality by the ministry of public health of the processor that surveyor.

4.4.1.1.2 2 sets with water quality at the same time be soaked test. Processor

4.4.1.2 health functional test

4.4.1.2.1 health functional test report by the ministry of public health recognized surveyor.

4.4.1.2.2 health functional test report including overall performance test report and assay inspection report.

4.4.1.2.3 have disinfection components (such as in silver activated carbon, iodine resin or ozone generator, etc) of water quality, water to each processor for silver, iodine, accordingly detection ozone concentrations.

4.4.1.2.4 have KDF water quality, water to each processor for measuring copper, zinc concentration; Ion exchange resin processor, each for water quality water should be measured hardness, sodium concentration.

4.4.1.2.5 2 sets with water quality at the same time be processor function test.

4.4.2 large water quality processor

4.4.2.1 domestic product by the approval of health administrative departments at the provincial level the inspection agency inspection; Import products entrusted by the ministry of public health and provincial inspection agency inspection.

4.4.2.2 shall submit the overall performance test report, including the normal operation and operation after 14 working days after two inspection report. Two times the amount of water can't deal with inspection interval is too little, according to the flow rate of the declaration shall be at least eight hours daily operation.

4.4.2.3 water treatment shall be simultaneously two as parallel samples.

5. Nameplate

Content of the nameplate shall include:

5.1 product name and trademark (name shall include name brand, model, general and attribute names).

5.2 the main technique parameters should include the water purification flow, total net amount of water and rated pressure of work (reverse osmosis and nanofiltration water processor shall state the feed water pressure range).

5.3 health license approval number: reserved.

5.4 production date (or product Numbers) : reserved.

5.5 standard number: refers to the enterprise standard or other related standards.

5.6 production enterprise name, address and zip code, phone number.

6. Manual

The description shall accurately express water quality of the processor functions, USES, structure and main technical parameters, still should guide the user proper use and maintenance of water quality processor. A complete instructions generally includes the following several parts:

6.1 product function (or introduction).

Shall indicate the municipal water after water treatment units, remove the water with some harmful material, so as to improve water quality, and the water to water quality for health code requirements.

6.2 applicable scope may not be extended to life has nothing to do with the applicable scope of the drinking water.

6.3 components and parts.

6.3.1 processing unit shall be marked and structure schematic drawing.

6.3.2 should explain the filter (or filter material), the service life of the membrane module, etc.

6.4 the main technique parameters should include the water purification flow, rated total net water content, pressure or feed water pressure, in and out of water quality, etc.

6.5 instructions shall include filter (or membrane module) cleaning and replacement. Large water quality processor as contains RO film or the nanofiltration membrane, it shall explain the cleaning and storage and cleaner or save the formulation of the agent.

7. Health safety certificate

7.1 health safety certificate can be health license copy of original (for four years), also can be the public health administrative department at or above the provincial level as the certificate of inspection, the actual production of the product makes the enterprise to the inspection report the original (for 2 years), and inspection report shall be indicated by the material or component brand, specifications and color to product characteristics.

7.2 water treatment materials and the main components in contact with water to provide health safety certificate.

7.3 the original license to provide health and inspection report material in the name and the name of the manufacturer shall be with declare data materials used in name and production manufacturer agreement.

8. Prototype

To provide reviews of the prototype for the following requirements:

8.1 the prototype shall provide for the production of products to finalize the design.

8.2 the prototype provide water treatment process, water treatment by material portion and producing area and inspection shall be prototype and filing materials are in agreement.

8.3 the prototype shall provide for unused new prototype, the outer packing should be in good condition.

8.4 shall provide color photos can clearly show that its appearance (including product nameplate) and internal structure.

9. As for the series, the above each content also shall be in line with the water quality processor series product health administrative licensing requirements of the supplementary provisions.

10. Has one of following state, shall make an administrative license the technology health review conclusion:

10.1 does not accord with the relevant laws, regulations, rules, regulations, standards, norms and regulations;

10.2 unsafe or can't provide adequate safety evaluation material;

10.3 the sample submitted, product formulas (material or chart), production process, the review material content such as the formula is not each other, effective component content and not the inspection results measured, and the products performance discrepancy, etc.;

Submission of false application material of 10.4.

Attachment 2

Domestic water purifiers and reverse osmosis domestic nanofiltration water purifiers health licensing product technical information "original" column write requirements

【 product description 】

Should indicate the type, the main parameter, outlet water quality. One should indicate the type for the large or small processor, such as water quality for series product still for A class should indicate or A class B; The main parameters of water purification should indicate the flow rate, total net water, rated feed water pressure; Should indicate the effluent water, reverse osmosis class shall be in line with the life of the health and safety of drinking water processor and the function of the evaluation standard, reverse osmosis treatment equipment "requirement, nanofiltration class shall be in line with the drinking water purification water quality standard of CJ94) requirement. (

【 composition 】 or parts

Should indicate the water treatment materials, shell, goose neck bibcock, control valves, water containers and bladder material, if use disinfection measures should also include sterilizer, large water quality processor shall also include pipes and pipe fittings, and all shall be marked with the name, specification (models), dosage and/or quantity.

As for A kind of series of products should be marked difference model appearance.

【 using range 】

Should indicate the municipal water in for raw water.

【 precautions 】

Should indicate the regular cleaning replace filter (film).